←back to thread

172 points fsflover | 1 comments | | HN request time: 0s | source
Show context
mystraline ◴[] No.45055517[source]
Good riddance.

That pile of garbage had crazy critical hardware faults they never fixed.

1. If the battery is discharged, then in order to recharge it, you have to take out the microsd and sim cards, press an SMT button, and plug in with battery.

2. If you bought the keyboard/battery, and you plug in USB on the phone, you fry the keyboard/battery. Shit burns up, haha screw you.

And if you say anything, you the user are at fault. You didn't read, or follow their discord, or whatever, because it is 'Your Fault' ™.

Pine's primary game here has been to paracitize off of FLOSS folks, pump out incompetent and/or broken hardware, and summarily blame FLOSS for their not-working. At minimum, they should be funding the projects they want to build on/paracitize. But they do none of the sort.

We would be better if Pine died as a company. Then they wouldn't be sucking the oxygen out of the FLOSS arena, and might get more respectable orgs here.

replies(2): >>45055697 #>>45056090 #
jbm ◴[] No.45055697[source]
I do not understand why so many companies have that charging issue with Linux devices.

Anbernic has the same issue with the RG35XX series. If the battery reaches 0, you may need to pull it out just to get the charging to work. And if you accidentally connect the wrong kind of usb-c charger, it won't charge, so you may have it plugged into the wall for days and come back to it being dead and needing battery surgery.

Great devices for hacking because they are cheap though — cannot understand why an expensive phone would have that problem too.

replies(3): >>45056006 #>>45056095 #>>45056128 #
fakedang ◴[] No.45056095[source]
> Great devices for hacking because they are cheap though — cannot understand why an expensive phone would have that problem too.

Because the more I read about Pinephone, the more it seems like a grift.

replies(1): >>45056551 #
1. mystraline ◴[] No.45056551[source]
I also had run ins with their Pine A64 LTS.

You can buy eMMC cards that fit on the board. Their documents say you can boot from them. Like 10x performance of a mSD card and less wear-out.

I use a USB device to make the drive mountable from a Linux box, and copy the firmware as prescribed. I then unmount and load in the A64, and.... NOTHING.

Supposedly there's a uboot command that maybe enables it. Or maybe its autodetect. Or maybe (5 other ideas, that all fail).

I returned that shit too because they make claims that it works these official ways, and it never does.

Pine is a parasite. Always has been, but they make-pretend that they're some great FLOSS company.