> On Jul 12th 2025 (UTC) India's media report that the investigation is NOT focussing on a human action causing the fuel switches to appear in the CUTOFF position, but on a system failure. Service Bulletins by Boeing issued in year 2018 recommending to upgrade the fuel switches to locked versions to prevent inadvertent flip of the switches, as well as the FAA/GE issued Service Bulletin FAA-2021-0273-0013 Attachment 2 relating to loss of control issue (also see above) were NOT implemented by Air India. The stated MN4 computer with faulty soldering, that might weaken and lose contact due to the thermal stress after a number of cycles, interprets data and commands fuel metering valves - with the lost contact attaching the MN4 processor to the EEC intermittent electrical contact, loss of signal processing and engine control faults can occur. The SB writes under conditions for the SB: "An LOTC (Loss Of Thrust Control) event has occurred due to an EEC MN4 microprocessor solder ball failure." According to discussions in the industry it may be possible with the number of cycles VT-ANB had already completed, the solder balls were weakened sufficiently to detach the MN4 from the EEC momentarily due to loads during the takeoff rotation leading to the loss of control of thrust and shut down of the engines.
Still quite early in the investigation, and so many things to consider. I don't know why online communities have been so quick to gravitate towards the murder/suicide theory. I thought aviation enthusiasts of all people would want to keep an open mind until every other possibility is ruled out, however minuscule it might seem.