←back to thread

Show HN: Interactive pinout for the Raspberry Pi Pico 2

(pico2.pinout.xyz)
141 points gadgetoid | 2 comments | 07 Jul 25 16:01 UTC | HN request time: 0.566s | source

I've been trying to make accessible and beautiful GPIO pinouts since I started one for the Raspberry Pi in 2013 [1]. I've since given the Raspberry Pi Pico [2] and Pico 2 [3] microcontrollers the same treatment when they launched.

Recently I've updated these with a new "Upside-down" view to complement the rear view, giving a pinout in the right orientation to match your project.

The Pico sites are all hand-coded single HTML pages with supporting CSS and minimal JS. They are set up to optionally install as a "Desktop" web app. They also degrade into a somewhat usable table in lieu of CSS and use vector graphics (for the board itself) to be viewable and printable at any size.

Finally, hidden behind "Advanced" is a pinout of the test pads and special function pins!

[1] - https://web.archive.org/web/20130505194305/pi.gadgetoid.com/... [2] - https://pico.pinout.xyz [3] - https://pico2.pinout.xyz

1. djaychela ◴[11 Jul 25 05:54 UTC] No.44528783[source]▶
That's really good as all the pinouts give all the extras on which can be overwhelming. Being able to just see the PWM capable outputs for instance is much nicer. And they look fantastic.

Thanks for your pimoroni [1] work as well, I've used quite a few products and they're always easy to work with because of good software and examples.

[1] - https://shop.pimoroni.com/

replies(1): >>44531246 #
2. gadgetoid ◴[11 Jul 25 12:12 UTC] No.44531246[source]▶
Thank you. You’re welcome on both counts!