Train and Weather Tracker with Raspberry Pi and E-Ink

(sambroner.com)

133 points tosh | 1 comments | 29 Mar 25 18:22 UTC | HN request time: 0s | source

Show context

mtlynch ◴[02 Apr 25 12:19 UTC] No.43555848[source]▶

The Waveshare e-ink display he's using is $172.99.[0] The one that jgrahamc used in a sibling comment is about $200.[1]

It's a shame that it's not easier to pull the e-ink displays out of used e-readers because you can buy old Kindles on eBay for about $20-40. I know you can jailbreak them and achieve something similar to OP, but it'd be neat if you could just drop the vendor's e-reader firmware entirely and run your own software.

[0] https://www.waveshare.com/product/displays/e-paper/9.7inch-e...

[1] https://soldered.com/product/inkplate-10-9-7-e-paper-board-c...

replies(3): >>43558097 #>>43559109 #>>43561561 #

mattmanser ◴[02 Apr 25 17:29 UTC] No.43559109[source]▶

>>43555848 #

I have an old kindle I was keeping in a draw as I planned to do something similar as the OP when I had time.

I've done no research yet though, what's the problem of reusing a kindle screen? It's not like old displays where you can plug a ribbon into something else?

replies(2): >>43559184 #>>43559324 #

1. nyrikki ◴[02 Apr 25 17:52 UTC] No.43559324[source]▶

>>43559109 #

No connection to this project, but I also have a couple sitting around for "some day" The biggest issue is that most of the adapter boards that are often available are not that great, so having a board built from EDPiy is an option.

https://github.com/vroland/epdiy

For the kindles that have wifi, custom firmware is probably easier?

↑