Skymont: Intel's E-Cores reach for the Sky (2024)

Slightly off topic, but if I'm aiming to get the fastest 'make -jN' for some random C project (such as the kernel) should I set N = #P [threads] + #E, or just the #P, or something else? Basically, is there a case where using the E cores slows a compile down? Or is power management a factor?

I timed it on the single Intel machine I have access to with E-cores and setting N = #P + #E was in fact the fastest, but I wonder if that's a general rule.

Did you test at least +1 if not *1.5 or something? I would expect you to occasionally get blocked on disk I/O and would want some spare work sitting hot to switch in.

Let me test that now. Note I only have 1 Intel machine so any results are very specific to this laptop.

  -j           time (mean ± σ)
  12 (#P+#E)   130.889 s ±  4.072 s
  13 (..+1)    135.049 s ±  2.270 s
   4 (#P)      179.845 s ±  1.783 s
   8 (#E)      141.669 s ±  3.441 s

Machine: 13th Gen Intel(R) Core(TM) i7-1365U; 2 x P-cores (4 threads), 8 x E-cores

Your processor has two P cores, and ten cores total, not twelve. The HyperThreading (SMT) does not make the two P cores into four cores. Your experiment with 4 threads will most likely result in using both P cores and two E cores, as no sane OS would double up threads on the P cores before the E cores were full with one thread each.