With Core One, Prusa's Open Source Hardware Dream Dies

There are too many cheap clones. Too much stealing of the open source work. This isn't remotely shocking, just look at Redis, Elastic and many many others... Open Source works until it doesn't.

I don't buy Prusa because they are OSH, I buy them because they are great printers. They are an open platform, if not open source. Which is good enough for my needs. If these changes they are making will allow Prusa to keep producing world class devices at reasonable prices, then more power to them.

And yes, I know some people hate Prusa or have had major issues. But they do a lot to move 3D printing forward, rising tide lifts all boats and all that jazz. We want all respectable and reputable 3D printer companies to succeed - because then everyone wins.

> keep producing world class devices at reasonable prices

At the current price points can you really recommend a Core One over an X1 to someone with a tight budget? Without resorting to arguments about open platforms and the big picture?

Firstly, neither of these are "budget". I think if you need a budget, you a probably best sticking to a Prusa Mini, Bambu P1s or A1 Mini.

Without a doubt. An X1 is 1k USD. This is 1,199 USD.

Truly this is a competitor to the X1E though which costs 2.5k (!!!) with basically the only notable addition being the heated chamber (which the Core 1 comes with for free).

I have multiple Prusa Mark 3s, a Prusa XL and an X1 carbon, and frankly I only use the Prusa XL nowadays (and sometimes the Mark 3s).

Bambu makes a good printer, but it has lots of annoying issues and proprietary annoyances. I also don't like them as a company, but that wouldn't prevent me from buying another if I needed and used it.

In my experience Prusa printers "just work" more often than Bambu printers do.

Frankly, the only advantage I see from a spec list for the Core One is a chamber exhaust (not heater, just exhaust).

Compared to a P1P it’s missing a camera.

Compared to the X1C it’s missing a camera, the LiDAR, and carbon rods.

Also, the AMS solution on Bambu printers is much better than the MMU by Prusa.