←back to thread

How good are American roads?

(www.construction-physics.com)
194 points chmaynard | 2 comments | | HN request time: 0.432s | source
Show context
rconti ◴[] No.42196461[source]
> Interestingly, in all cases urban roads are worse quality than rural roads, presumably because they see higher traffic than rural roads.

There's more infrastructure under urban roads. Crews come in to fix some utility, shred a section of a lane, patch it poorly with dissimilar materials, and leave.

replies(13): >>42196522 #>>42196736 #>>42197205 #>>42197899 #>>42198008 #>>42198655 #>>42198873 #>>42199005 #>>42199037 #>>42200024 #>>42201080 #>>42201777 #>>42202637 #
bluGill ◴[] No.42196522[source]
Rural roads are often unpaved. The local authority has to come by regularly with a grade to redo things or they become unusable quickly. Overall this is by far the cheapest way to have a road, but it doesn't scale to high use and city folks demand something that makes less dust. Rural roads also includes minimum maintance roads which demand 4wd (real 4wd, many SUVs will have trouble) when the weather is nice and a winch is a must when things get rainy or snowy.

Though given his definition of quality I expect he is actually ignoring all the real rural roads and only talking about major roads which while they get less traffic than urban roads are maintained to similar standards.

replies(7): >>42196647 #>>42196685 #>>42197519 #>>42197529 #>>42198276 #>>42199536 #>>42199548 #
rwiggins ◴[] No.42196685[source]
Maybe area-dependent? I grew up in an extraordinarily rural area in Tennessee. Most roads were paved (asphalt). Even ones out in the middle of nowhere.

The conditions of some of the remote roads might not have been great, mind you... and some seemed "thinner" almost, maybe paved a long time ago?

replies(3): >>42196803 #>>42197037 #>>42198207 #
1. ensignavenger ◴[] No.42198207[source]
Chip and Seal is a technique used in a lot of rural areas that comes in with less maintenance than gravel but not as expensive as asphalt. It is basically a a top thin layer of tar with gravel pressed into it.
replies(1): >>42198782 #
2. pkaye ◴[] No.42198782[source]
My city in SF bay area resurfaced some residential streets that way. So far it held on well for 10 years probably because we don't get much truck traffic. Meanwhile the near freeway is a major route for big trucks so after the winter rain its all full of potholes.