←back to thread

Watch TV from the 90s and earlier

(my90stv.com)
653 points thunderbong | 1 comments | 28 Jul 23 12:46 UTC | HN request time: 0.217s | source
Show context
coin ◴[28 Jul 23 15:37 UTC] No.36908469[source]▶
Why the static between changing channels. Analog TVs would change channels instantly.
replies(3): >>36908729 #>>36908780 #>>36910485 #
boomboomsubban ◴[28 Jul 23 15:54 UTC] No.36908729[source]▶
In my experience, it was fairly common for there to be (as an example) a channel 3 and a channel 5 but no 4, so if you were flipping through the channels on certain TV's you'd see static.
replies(3): >>36908784 #>>36908917 #>>36909096 #
SoftTalker ◴[28 Jul 23 16:14 UTC] No.36909096[source]▶
Yes, in broadcast (over the air) TV, only every other channel was allocated in a given area. That's why most devices that connected to a TV (computers, VCRs, etc.) could use either channel 3 or channel 4 because one of the two would be unused.
replies(1): >>36912285 #
ThinkingGuy ◴[28 Jul 23 19:46 UTC] No.36912285[source]▶
There were some exceptions, though, as the VHF TV channels aren't all contiguous. In North America, there's a gap between channels 4 and 5; and channels 6 and 7 are separated by the bands for several radio services (FM, aviation, amateur, and marine).

https://upload.wikimedia.org/wikipedia/commons/c/cc/VHF_Usag...

replies(1): >>36912476 #
SoftTalker ◴[28 Jul 23 19:59 UTC] No.36912476[source]▶
Hm, didn't know that. But I still remember the channels we had when I was a kid:

2, 4, 6, 8, 10, 13, and UHF 30.

I also remember that depending on the radio, you could sometimes pick up the audio for I think VHF channel 6 at the low end of the FM dial.

replies(2): >>36912746 #>>36912996 #
1. jzb ◴[28 Jul 23 20:39 UTC] No.36912996[source]▶
ISTR we had 2,4,5,9,11, and 30 (UHF). Channels 2-5 were ABC, CBS, and NBC. Channel 9 was PBS, and 11 and 30 were local stations that weren't affiliated with any of the major networks.